The Klein Tools NCVT-6 is a non-contact voltage tester (NCVT) with an integrated laser distance meter. It can detect voltage over the full-range from 12 to 1000 VAC and can measure distances from 2-Inch (51 mm) up to 66-Feet (20 m). The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface. Easy, single-button changes between voltage detection and laser distance measurements.
Key Features
- Non-contact Tester determines AC voltage in cables, cords, circuit breakers, switches, outlets, wires, as well as security, entertainment, communications, environmental control, and irrigation systems
- Volt Pen detects AC voltage from 12 to 1000V with visual and audible indicators
- Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16-Inch (0.16 cm)
- High-visibility reverse contrast display for better viewing in low light conditions
- Laser Class II, 630 to 670nm, Max. Power <1mW
- Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection
- Delivers simultaneous visual and audible voltage indicators when AC voltage is detected
- Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source
- Built to withstand a 6.6-Foot (2 m) drop
- Auto Power-Off conserves and extends battery life
- Screw-thread battery cap
- Lightweight tool with pocket clip for easy everyday carrying and storage
- CAT IV 1000V safety rating
- Ingress Protection IP40 Dust Resistant
- Under normal operating conditions, at distances from 2-Inch to 32.8-Foot the NCVT-6 has an accuracy of +/- 1/16-Inch; and at distances greater than 32.8-Foot up to 65.6-Foot, accuracy of +/- 1/8-Inch
Specifications
SKU |
26168 |
Brand |
Klein Tools |
Manufacturer Part No. |
NCVT-6 |
UPC |
092644692253 |
Type |
Non-Contact Voltage Tester |
Material |
Plastic and Electronic Assemblies |
Drop Protection |
6.6' (2 m) |
Voltage |
12 - 1000V AC |
Frequency |
50 - 500 Hz |
Pollution Degree |
2 |
Ingress Protection |
IP40 Dust Resistant |
Accuracy |
1/16'' from 2'' to 32.8'; 1/8'' from 32.8' to 65.6' |
Standard |
CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW |
Included |
NCVT; 2 x Alkaline 1.5V AAA Batteries |
Batteries |
2 x AAA |
Battery Life |
125 hr |
Overall Length |
6.45'' (16.4 cm) |
Overall Height |
1.32'' (3.4 cm) |
Overall Width |
1.21'' (3.1 cm) |
Weight |
2.5 oz (72 g) |