Description
The TECH-MCTP INFRARED is a compact service tool bag in the new black and red color scheme. Identical in construction and storage capacity to the TECH-MCT BLACKOUT – with the addition of side pockets for separate meter or tool storage. The bag also features external daisy chains, for attaching pouches and accessories as well as Velcro ideal for personalizing with morale patches. The TECH-MCTP INFRARED edition comes with the V-SWAP Tool Panel, and the V-SWAP Meter Panel. Additional panels are available and sold separately.
PRODUCT SPECIFICATIONS:
- Height (H): 14" (35.6 cm)
- Width (W): 16" (40.6 cm)
- Depth (D): 8.5" (21.6 cm)
- Weight (empty): 8.6lbs/ 3.9 kg
- Internal Volume: 930in3/15.3 L
- Max Payload: 40lbs/18kg
MAXIMIZED TOOL STORAGE CAPACITY:
- V-SWAP™ removable tool pocket panel system (panels available & sold separately)
- INFRARED color scheme
- External daisy chain for attaching pouches and accessories
- External Velcro loop for attaching patches
- 55 interior and exterior pockets of varying sizes
- 2 external side pockets for separate meter or tool storage
- Neoprene Pockets for Meters/Testers
- Holds over 50 hand tools
- Polypropylene plastic base for moisture and abrasion protection
- Extra wide padded shoulder strap
- Articulating/fold-flat handle with over-molded ergonomic grip
- YKK® zippers
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
