Satco LED A21 Lamp - 20 Watt - 2700K, 4000K or 5000K - 120-277 Volt | Replaces 150W Incandescent - 3,020 Lumens - Non-Dimmable - Medium Base - S28737

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO Hi-Pro LED products when delivered in new condition and in its original package. This LED lamp is designed to operate on line voltage ranging from 100V to 277V AC. If the fixture contains a ballast, it must be by-passed or removed before this LED lamp is installed. Failure to by-pass or remove the existing ballast could result in damage to the product and will void its warranty. The operating temperature range for the Hi-Pro LED product line is: -20°C (-4°F) to a maximum of +60°C (+140°F) unless otherwise noted on the box. When used in an enclosed fixture, the lamp must be installed in accordance with the recommended compartment size for that lamp. Lamp life may vary depending on application, use, fixture type and environment. Not for use in explosion proof or vapor tight fixtures. LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products. Only LED rated devices should be used and if not, the warranty can be voided. The product is warranted against defects in material and workmanship for 5 years from date of purchase, based on 12 hours per day of use. Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged. This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below: Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on the product packaging. Service provided by someone other than SATCO or an authorized service provider. Warranty is void if product is not used for the intention which product was manufactured. Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.