Satco - 21 in. - LED T5 Tube - 7 W - 700 Lumens - 4000K | Ballast Bypass (Type B) - F13T5 Replacement - Mini Bi-Pin - 120-277 Volt - S11908

(4 reviews) Write a Review
SKU:
32070
UPC:
045923119088
MPN:
S11908
Condition:
New
Shipping:
Calculated at Checkout
$8.90
Frequently bought together:

Description

SKU 32070
Brand Satco
MPN S11908
Model 7W/LED/T5/840/BP
UPC 045923119088
Lamp Shape T5
Length 21 in.
Wattage 7 W
Equivalent 13 W
Replaces F13T5/CW
Lumens 700 lumens
Efficacy 100 lumens / W
Color Temperature 4000K
Color Rendering 80+ CRI
Beam Angle 240°
Base Type Mini Bi-Pin
Base Code G5
Power Factor >0.9
Operating Temperature -25 °C to 45 °C
Life Rating 50,000 hours
Operation Type UL Type B - Ballast Bypass
Wiring Double-Ended
Voltage 120-277 V
Material Shatterproof Glass
Lens Frosted
Location Rating Damp / Open
Dimmable No
UL Yes
ETL No
RoHS Yes
DLC No
DLC ID N/A
FCC Yes
Energy Star No
View AllClose

Warranty Information

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO LED T5 lamps, when delivered in new condition and in its original package. The product is warranted against defects in material and workmanship for 5 years from date of purchase. Operate according to specification, e.g., within specified input voltage, and operating ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F). Average rated life may vary depending on application, use, fixture type and environment. Not for use in fully enclosed vapor tight fixtures. Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged. This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below: Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on packaging. Service provided by someone other than SATCO or an authorized service provider. Warranty is void if product is not used for the intention which product was manufactured or installation instructions were not properly followed as noted on the package: Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.
View AllClose

Additional Information

Base Type:
Mini Bi-Pin
Color Temperature (CCT):
4000K
CRI:
80+
Dimmable:
No
Equivalent:
13 W
Lamp Shape:
T5
Length:
21 in.
Life Hours:
50,000
Lumens:
700
Lumens per Watt:
100
Operation Type:
Type B (Bypass)
Voltage:
120/208/240/277
Wattage:
7 W
Wiring Method:
Double Ended
View AllClose

4 Reviews

  • 5
    Works great

    Installing the tube was easy, I just had to remove the ballast and reconnect the hot and neutral wires. The color is almost the same as the neon 4000k, and it is a bit brighter, but not much. I'll use these tubes from now on instead of replacing ballasts.

  • 5
    Excellent Bypass Fluorescent Lamp Replacement

    The lamp gives off a bit more light than the original fluorescent lamp. The hardest thing is to modify the unit by removing the ballast and rewiring the assembly. Need to pay attention on rewiring as to the line and neutral on the same end (single end powered) or the line and neutral on opposite sides (dual end powered) of the lamp, and match your lamp order to the new modified wiring configuration. Once this is done, just reorder the same LED lamp, if it has to be replaced at all. And at this point in my house, I would rather convert each fluorescent fixture to LED lamps than replace the fixture itself, much easier.

  • 5
    SATCO - 21 IN. - LED T5 - F13T5 REPLACEMENT - 4000K | BALLAST BYPASS - 7 WATT - 700 LUMENS - 120-277 VOLT - S11908

    Just had to do a little rewiring in the fixture to bypass the ballast so the lamp is wired directly to 120vac (through a switch, of course). Works great.

  • 5
    T5 7watt 4000k

    Works great, I chose 4000k and it looks the same color as florescent (white light) but brighter. I should have chose 3000k as it would match better for kitchen under cabinet lighting

View AllClose